Cyano?

[iujona]

Been dosing for a few weeks.

[jacky]

Doesn't look like cyano, it looks like dino

[G.Alexander]

I am with Jacky, looks more like Dinoflaggelate from the picture.

G.Alexander

[iujona]

How do I get rid of it?

[jacky]

It seems that dry rock is used. Compared with high quality live rock, biological establishment takes a longer time. Perhaps this is not the main cause of the induced dino, but it seems to be shallow. In any case, before the main reason is found. , You can try to do so, use black cloth to completely cover the main display system and sump, to avoid any light entering, do 3 days. This should slow down dino.

[iujona]

Thanks . Can I use a UV sterilizer?

[G.Alexander]

A total black out of light (also indirect light from the room) for 3 days has helped many as Jacky has mention. You can also try UV but it does usually not fix the problem. If you like to give it a try switch off the UV for 2 hours while dosing any kind of products.

G.Alexander

[iujona]

Thanks. Should i turn off my Zeo reactor and skimmer? Also should I dose Coral Snow and Cyano or other KZ products?

[jacky]

The Zeo reactor and skimmer should not be turned off. During this time when the lights are turned off, the filter socks should be replaced every day. You should find that the filter socks or the filter cotton appear (brown red). Zeo CoralSnow does not really help dino treatment, but the dosage @ 1ml / 25 US gallons per day, 7 days, is very good. In addition, is the ro / di device good for tds? # 10 Fill in the instructions in detail so that you will understand more

[jacky]

1. The total water volume of the entire system (including water tank, etc.)-US gallons / imperial gallons / liter
2. The amount of water purification (including water tank, etc.)-US gallons / imperial gallons / liter
3. You are using CaCO2 reactor or other technology
4. You are using a PO4 reactor (how long, how long ago etc.)
5. You are using ozone
6. You are using UV
7. What separator are you using (type, rated water volume)
8. Your actual PO4 and NO3 content
how many? 9. Your actual Ca, Alk and Mg content
how many? 10. What filtering method do you use (refuge, DSB, miracle mud, etc.).
11. Type of light (watt, color temperature, age, etc.)
12. What coral do you keep
13. The color of the tissue (light or dark)
14. How long did the water tank run
15. Why do you use ZEOvit system
16. Any supplemental dose (type, quantity, reason, etc.)
17. Living stones (how many, how old etc.)
18. Any existing problems
19. Problem description (Tissue loss tips, tissue loss basis, diatom powder, algae, etc.
. 20. What test suite do you use (how old, recently switched, etc.)
21. Current dosage, dosage and interval (ZEOvit, ZEObak, ZEOfood, ZEOstart, ZEOspur2, etc.)
twenty two. Other water parameters and water stability (salinity, temperature, etc.)
23. Which salt brand do you use

[iujona]

1. The total water volume of the entire system (including water tank, etc.)-US gallons / imperial gallons / liter
2. The amount of water purification (including water tank, etc.)-US gallons / imperial gallons / liter
3. You are using CaCO2 reactor or other technology
4. You are using a PO4 reactor (how long, how long ago etc.)
5. You are using ozone
6. You are using UV
7. What separator are you using (type, rated water volume)
8. Your actual PO4 and NO3 content
how many? 9. Your actual Ca, Alk and Mg content
how many? 10. What filtering method do you use (refuge, DSB, miracle mud, etc.).
11. Type of light (watt, color temperature, age, etc.)
12. What coral do you keep
13. The color of the tissue (light or dark)
14. How long did the water tank run
15. Why do you use ZEOvit system
16. Any supplemental dose (type, quantity, reason, etc.)
17. Living stones (how many, how old etc.)
18. Any existing problems
19. Problem description (Tissue loss tips, tissue loss basis, diatom powder, algae, etc.
. 20. What test suite do you use (how old, recently switched, etc.)
21. Current dosage, dosage and interval (ZEOvit, ZEObak, ZEOfood, ZEOstart, ZEOspur2, etc.)
twenty two. Other water parameters and water stability (salinity, temperature, etc.)
23. Which salt brand do you use

1. 200gallons
2. Sump 50bgallons
3. Carx vertex
4. No po4 reactor
5. No
6. No.
7. What’s separator?
8. 0,0
9. 8.8 Hk 500 ca 1400 mg
10. Clarisea SK 5000
11. orphek atanlitk v4 with t5 blue plus
12. Sps
13. Dark
14. 1 year
15. I want sps
16. No
17 . Zeostones 1.7l
18. No
19. Dinos
20. Neptune trident . Hanna po4. Salifert no3
21. Stopped dosing after Dino. 1.026 SG 26c.
22. Aquaforest

[iujona]

Ro di tds 0 using vertex rodi

[jacky]

Thank you for your message. Sorry, may I ask, what is the net water volume, and what Zeo basic products do you own?

[iujona]

147g. Zeostart zeobak in recommended doses

[jacky]

Thank you. Zeo CoralSnow 5.9ml x 10 days, 6 drops of Zeo bac, 2-3 times a week. Zeo Start 0.59ml x2 (every morning and evening), when the product is added, turn off the sterilization lamp for 2hr. This does not help solve dino, but I think the direction is good