Tweet
Well, my stand is finally finished. I finally got off my ass, used Dave B's hole saw kit and got myself a jigsaw. WOOHEE jigsaws are sharp. Came close a few times. Anyways....tank delivery FRIDAY!
-
10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKS -
lets hope those holes are in the right place
-
Chuck one thing i forgot to do was over size the holes to make them big enough to get your hands in there to tighten the bulkheads.... espically if your bulkheads are not the circle ones and are the octagon ones that i got...
just wanted to give you a heads up incase you need to redrill before you get the tank on the stand,
i had to pull the tank off to drill bigger holes, and it sucked!
Nick275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LRComment
-
LOL! I hope so too!Originally posted by Heinzlets hope those holes are in the right placeComment
-
I way oversized 'em for two reasons. One like you said, so you can tighten the bulkheads and two for the reason Heinz cited--just in case they're a little off. I used a real template to drill the holes. Rolled some butcher paper over the bottom of the tank and traced the holes.10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
nice looking stand cant wait to see the tank on it.anacroporamademepooraComment
-
The tank has been delivered...Pix forthcoming....Holy crud was it heavy...10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
whooo hoo about time!Originally posted by moonpod
Comment
Comment