Start with zeovit

[Macci09]

aa ok now i understand yes i am still using nppro bio s and phos minus all at half dosage as i am removing slowley


thanks

[G.Alexander]

Thank you, have calculated the dosing regimen for a net water volume of 650 liters, lets start as follows:

1. Place 1.6 liter zeovit in a Zeo Reactor. Water flow around 650 liters per hour. Connect the reactor pump to a clock timer and run the reactor pump with a 3 hour on / 3 hour off / 3 hour on interval. Please make sure the zeolite is not exposed to air while the pump is switched off. In about 6 weeks you can switch the reactor to continuous flow if corals are doing fine. Clean the material daily. Leave the zeolite 4 weeks in the filter until you do the first change out. This is the first changing interval, others could be lengthen to 6 – 8 weeks.

2. Place 0.65 liters activated carbon in a filter sock and keep it in a passive water flow in your sump, changed every 30 days. Knead the carbon daily to keep the surface clean. Most users get perfect results with korallenzucht carbon.

3. Dose 7 drops ZeoBac daily for the first 2 weeks, flowed by a 2 – 3 x weekly dosage of 7 drops. Dose 0.65 ml ZeoStart 2 x daily (morning & evening). Dose those in front of the Zeo reactor pump while it is switched on.

4. The additional dosage of some food source for the corals would be fine so you can continue to use Xtra and CoralLove as you already do, stop dosing the other products for the next couple of weeks.

Adjust your skimmer to skim wet, keeping it clean to export as much as possible. Do a weekly water change of 5 – 10 % with a good salt.

Keep using aquaforest np pro and aquaforest phos minusat 50% at the moment, start reducing both slowly step by step in about one week until you have removed / stopped them completely.

Basic water parameters looking good, try to keep them as solid as possible close the NSW in the following ranges:

KH 6.5 – 7.5
Ca 400 – 420 mg
Mg 1250 – 1300 mg
K+ ~ 380 mg

For a nutrient poor environment K+ (potassium) seems to be a important element. I would recommend you to get a test kit for this element also, posting your results.

This is a start-up dosage which might have to be adjusted later.

G.Alexander

[NZ-Nick]

Good morning

jacky maybe you can help me with my spectrum

i have 2 hybrid lamps 8 bulb and x 3 75 watts led that i put them at 50% instensity (led)

as bulb combination i have x2 ati coral plus x4 ati blue plus and x2 actinic i run them 8 hrs a day

here are the led setting



yes my tds is 0 and last stage is resin


alaxander yes the photo looks like that, at the moment i only using the below

zeovit
zeostart
zeobak
sponge power
corla vitilizer

and yes you we use the link is correct

I would recommend contacting Pacific Sun,

-for you led spectrum
-they also have there pre programs, BAIL, Fiji, which they designed the lights around from there on water testing
Are you using there program

They use to suggest
Pigment NT and Cystal blue (there bulbs) which is similar to C+ and B+ which you are running