Start with zeovit

[Bugger]

Kz salt i cant no one stock it in malta and to bring it here shipping is very expansive

i have the option for

fauna marine
aquaforest
tropicql marine any suggestions please ?

they're all good options

[NZ-Nick]

they're all good options

I totally agree with Mister Bugger

-Stability is the key

choose a salt that is All WAYs available.

And is close to you tanks parameters that you want to run.
- this way you don’t have to change when it’s out of stock

[Macci09]

today my Zeovit products arrived unfortunately they did not send me the zeolite stone. and my local fish store they going to have in stock about a month time. until Kz stone arrived i can use other zeolite stone from fauna marine ?

[jacky]

I don't have experience with other brands of zeolite so I can't say anything, I would suggest you to use Zeo's zeolite, it might avoid some unknown problems, or it might be ok, but I really don't know.

[G.Alexander]

To be honest I would also recommend to wait until the material does arrive, if you like to you can start dosing some of the elements you already have, can you post a list of what you already have ?

G.Alexander

[Macci09]

its been 50 days since i start. now i notice that colors is not that i wish. i thing it start in full system.

below its a daily sheet. can you please help if this is ok and what i need to change

[G.Alexander]

Can you please share the actual PO4 and NO3 level, also please define “colors are not as I wish” a little bit more precise, some pictures might be helpful also.

In your above dosing regimen the ZeoStart dosage is much to high. The correct dosing quantity for a net water volume of 1000 liters would be 1 ml 2 x daily instead of 7 ml daily.

G.Alexander

[Macci09]

tested with Hanna po4 is 0,01 and no3 0

here are some photos of the corals

about seostart sorry i write it wrong on the sheet

[jacky]

SPS coral tissue looks creamy, this may be a spectrum imbalance, the lighting should be as good as the natural spectrum lighting, and it may also be an element problem, each time 15% of the water is changed 3 times in 10 days to balance way to refresh/replenish elements.

Zeo Bac 10 drops (2-3 times a week)
ZeoStart 1ml x2 (every morning and night)
ZeoSpongePower 10 drops (every other day)
Zeolite material: 2.5 liters
Reactor flow: 1000 liters per hour
KZ carbon 1 liter (passive flight)

Cyano on Liverock: Please also check the filtered water, TDS is 0, it is recommended to use resin material as the last channel of the filter, CoralSnow20ml+ZeoBac10 drops x7 days.

Temporary suspension of iodine addition

[G.Alexander]

Thank you for the additional information and pictures. I have a question to the plating Montipora corals, do they have partial thin tissue or is it just a effect of the pictures ?

If I understand your question correct you plan to transfer your system to full ZeoVit while you use some of the products (your dosing plan) already but not the ZeoVit material ?

Are the following information still correct and can be used for a dosing recommendation:

https://forum.zeovit.com/forum/gener...872#post604872

G.Alexander

[Macci09]

Good morning

jacky maybe you can help me with my spectrum

i have 2 hybrid lamps 8 bulb and x 3 75 watts led that i put them at 50% instensity (led)

as bulb combination i have x2 ati coral plus x4 ati blue plus and x2 actinic i run them 8 hrs a day

here are the led setting



yes my tds is 0 and last stage is resin


alaxander yes the photo looks like that, at the moment i only using the below

zeovit
zeostart
zeobak
sponge power
corla vitilizer

and yes you we use the link is correct

[jacky]

I have no experience with LED lighting, really sorry. The part of the tube is white ati coral plus x5, blue x2, and purple x1. With the spectrum of the Led, it should be good. (Listen to see other people's better suggestions).

Net water volume - 700lts , then the dosage I mentioned in # 24 is wrong.

Please also reconfirm that actual base water parameters including potassium concentration should be kept stable at NSW levels

G. Alexander asked
「If I understand your question correct you plan to transfer your system to full ZeoVit while you use some of the products (your dosing plan) already but not the ZeoVit material ?」

[Macci09]

G. ALEXANDER i dont know if i understand you well. i am using everything from kz zeovit. i have just transfer from af to zeovit and now i am asking if i can go full system. i apologise about my english

[Macci09]

my parameters are

no3-0
po4-0,01
kh 7,8
calc 430
mag 1350
pottasium 410
iodine 0,045

[G.Alexander]

Looks like you are recently use two AF products:

aquaforest np pro
aquaforest phos minus

Is that correct or do you use any additional products from them ?

It would be important as it will have a impact to how the transfer to ZeoVit should be done.

G.Alexander