Announcement

Collapse
No announcement yet.

VOTE for my CL Intake screen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • VOTE for my CL Intake screen

    I got clear screens, but they are upright:


    OR Black low profile screens:


    HELP ME CHOOSE
    10x3x2 FOWLR (for now)
    BK400ext
    RD12 return, 2 RD12 closed loop, wavebox with extension
    MRC kalkmixer
    IKS

  • #2
    I like those black low profile ones - where did you get them?
    --Matt

    Comment


    • #3
      Those black ones are nice!

      Comment


      • #4
        black low profile get my vote,

        Comment


        • #5
          BLP....

          Comment


          • #6
            No doubt I'd go with the clear ones. The black ones look cool but the goal is not to see either, right? You have two drains for each RD12 so that's 3,100GPH + 25% possibly. You're gonna have over 1,700 GPH going thru them, possibly close to 2,000. Thats a lot of suction. I have the same screen heat welded to my bulkhead but mines even longer - and I'm gonna run about 1,500. I just like to give weak fish a chance. ;-)

            Comment


            • #7
              The black ones are jacuzzi stuff.
              10x3x2 FOWLR (for now)
              BK400ext
              RD12 return, 2 RD12 closed loop, wavebox with extension
              MRC kalkmixer
              IKS

              Comment


              • #8
                if they both do the same thing, then i'd go for the black ones

                Comment


                • #9
                  black low pros
                  Dustin

                  "Water is the driving force of all nature"
                  Leonardo da Vinci

                  Comment


                  • #10
                    Originally posted by Miguelito
                    I just like to give weak fish a chance. ;-)
                    That's what worries me....but then again, I don't really plan on any truly weazy fish....
                    10x3x2 FOWLR (for now)
                    BK400ext
                    RD12 return, 2 RD12 closed loop, wavebox with extension
                    MRC kalkmixer
                    IKS

                    Comment


                    • #11
                      BLP! They are nice!

                      Comment


                      • #12
                        BLP! looks very sleek when compared to the clear ones..
                        Farish

                        Setup: 250G System, ATI Powermodul 10x80w T5s, 4x6100 Tunze Streams & 7095 MultiController, Deltec PF1000 CR, Deltec AP902 Skimmer, IKS, Zeovit, Artica 1Hp Chiller

                        Comment


                        • #13
                          where did you pick those black ones up at if you dont mind me asking?

                          Nick
                          275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LR

                          Comment


                          • #14
                            Opps, sorry what is the screen for?

                            Comment


                            • #15
                              Originally posted by reefplayer
                              Opps, sorry what is the screen for?
                              Originally posted by moonpod
                              VOTE for my CL Intake screen
                              i think the titel said it best

                              Comment

                              Working...
                              X