Announcement

Collapse
No announcement yet.

Questions about Hanna phospate reading

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Questions about Hanna phospate reading

    I got my meter this evening. I did 2 tests and got .01 and .02. I'm now officially in phase 3.

    What is the preferred range? From recent, posts I gather that running too low can cause problems. IIRC, Bob said he runs between .03 and .05. I'm thinking of holding start2 for a little bit, to bring it up.

    Tom
    Current Tank: 75g sps restarted with ZEOvit August 2004, Aqua Connect 14K 250W SE MH x 2, SLS HQI ballasts, 54W blueplus T5s x 2, H&S A150 external (recirculating) skimmer, Tunze Stream 6060, 6000 with single controller, Geo Ca reactor, in-sump ZEOvit reactor from Madison, Aquacontroller

  • #2
    tom,
    right now i have 0,05 .but alexander recomended to keep at 0.04.

    mike

    Comment


    • #3
      Never thought I would see the day where we have to add phosphates to keep things balanced.
      265 gallon SPS tank. Bubble King 300 Internal, MRC CR-6 Calc Reactor. 3 400 watt 20k Helios. 90 gallon Frag tank plumbed into main display.

      Comment


      • #4
        True. When I got my Hanna I found I've been running Po4 to low. Have allowed it to rise and am now getting noticeably better growth. PE is better also although that may have to do with the removal of two polyp nipping gobies.
        Now I've got the Hanna, I would not want to go back.

        Comment


        • #5
          Mike I had my best growth an coloration with a Hanna reading around 0,02 – 0,03 but everybody remember this measuring instrument has also tolerances. Do not leave your corals out of the focus.

          G.Alexander

          Comment


          • #6
            What I like to add. As long as you have good coloration and growth, I would not recommend to rise the PO4 level in any way.

            G.Alexander

            Comment


            • #7
              yup i remember bob mention that keeping p04 at 0.01~3 is a better option and sps are in their real color when in this range but once u hit 0.04~5 the sps will give a dull color.
              ---------------------------
              180g 3 side Low Iron Glass, Lighting: ATI Power Module 10 x 80W KZ Coral Light (awiting for to mix with fiji purple), Return Pump: Red Dragon 12m3, Tunze WaveMaker:1x 6200, 3 x 6100 and 1 x 6060 + Multicontroller 7095, Bubble King 300 Internal, Deltec - PF 601S, Arctica Chiller 1/2HP, I~Zeo Reactor IZ-618

              BK 300 in actionhttp://smg.photobucket.com/albums/v5...IDEO_00003.flv

              Comment


              • #8
                Yes, Keigo, I've found .01-.03 Hanna to be fine with heavier dosages of AAHC & the other zeo-supplements to bring out color & still maintain growth & no nusance algae. Until nutrients are very low, higher supplemental dosages will result in feathery slime formation on the rocks & brownish accumulates on the panes Bob
                "There might be something to this ZEOvit"

                Comment


                • #9
                  just tested my water... i got 0,04...
                  bob, should i continiue to dose the same amount of start2 or increase a bit?

                  mike

                  Comment


                  • #10
                    Hi Mike, sure, you can increase Start2 for one wk, then recheck the Hanna--isn't this a new system? If so, the readings may stay up for awhile inspite of increasing Start2. Bob
                    "There might be something to this ZEOvit"

                    Comment


                    • #11
                      yes, bob...i have running this system for 28 days exact.
                      i am dosing 23 ml per week ,4 dosing per day..should i try 30 ml per week?

                      mike

                      Comment


                      • #12
                        Mike, that should be perfect, ie. 1ml extra/day. Bob
                        "There might be something to this ZEOvit"

                        Comment


                        • #13
                          thankx ,bob

                          Comment

                          Working...
                          X
                          😀
                          🥰
                          🤢
                          😎
                          😡
                          👍
                          👎