Announcement

Collapse
No announcement yet.

Mounting frags on zeolite???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mounting frags on zeolite???

    Is there a reason not to mount frags onto a few pieces of the old zeolite??

  • #2
    I have read, some people doing it. It works fine.

    G.Alexander

    Comment


    • #3
      I have mounted several pieces on the zeo rocks with no ill effects.
      265 gallon SPS tank. Bubble King 300 Internal, MRC CR-6 Calc Reactor. 3 400 watt 20k Helios. 90 gallon Frag tank plumbed into main display.

      Comment


      • #4
        Thanks, I'll give it a try then.

        Comment


        • #5
          Dave Botwin mounts his frags on zeo rocks all the time w/o ill effects.

          Comment


          • #6
            I have done it. No problems at all.

            One thing you may want to consider... DONT SHIP these frags with a zeolite in the bag. If the zeolite is still active, it will change the water paramaters during the shipping process.

            One thing that may help is when you ship fish with a zeolite. It should remove NH4 if needed.

            Comment


            • #7
              What do you guys use to mount it to the zeolite with, superglue?

              I tried epoxy but it didn't hold.
              400 gallon reef, Bubble King 300, I~Spin, 2 x 10,000K BLV 400W, 2 x 20,000K Radium 400W, 2 x 6,400K Osram 400W, Schuran Jetstream 1, AquaController Pro

              Comment


              • #8
                super glue gel here...

                Comment


                • #9
                  I mounted two frags to my old zeolite with super glue gel. It worked great.

                  Comment

                  Working...
                  X