Announcement

Collapse
No announcement yet.

Urgent Help. Got Start and not Start 2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Urgent Help. Got Start and not Start 2

    Got my kit today and have got Start and not Start 2.

    Do I need to change dose instructions.

    Tank Spec is:
    1. Gross water volume of your complete system (incl. sump etc.) 120 Imp G
    2. Net water volume (incl. sump etc.) 100 Imp G
    3. Are you using a CaCO2 reactor or other technique. Kalk but will get Ca Reactor Soon
    4. Are you using a PO4 reactor (how long, how long ago, etc.)Yes with Rowa for 12 Months
    5. Are you using Ozone. No
    6. Are you using UV. No
    7. What skimmer are you using (type, rated water volume). APF600
    8. What are your actual PO4 and NO3 levels. PO4 will test Tommorow. NO3 10ppm
    9. What are your actual Ca, Alk and Mg levels. 430, 8,1420
    10. What filtration method do you use (refugium, DSB, Miracle Mud, etc.). DSB and a algea refugium which I will remove.
    11. Type of light (Watt, color temp, how old, etc.) 2x 250W XM 10K and a 150W 50K.
    12. What corals do you keep. SPS and LPS.
    13. Tissue color (light or dark). Dark
    14. How long has the tank been running. 2 Years.
    15. Why do you want to use the ZEOvit system. Color of corals.
    16. Any supplemental dosing (type, amount, why, etc.)None apart from Kalk
    17. Live rock (how much, how old, etc.).70-80 KG all 2 years old+
    18. Any present problems. Just color of corals.
    19. Problem description (tissue loss tips, tissue loss base, diatom bloom, algae, etc.). None, Tank very stable might have high stock level.
    20. What test kit do you use (how old, recently switched, etc.). Salfiet.
    21. Present dosing, amounts and intervals (ZEOvit, ZEObak, ZEOfood, ZEOstart, ZEOspur2, etc.)Start Friday...
    22. Other water parameters and water stability (salinity, temp, etc.) 1.024 and 78F ish. Very stable.

    Thanks.

    Rich B.

  • #2
    rich,
    how do u know its start 1?

    mike

    Comment


    • #3
      Originally posted by mshur
      rich,
      how do u know its start 1?

      mike
      Mike,

      Sorry I dont but It just say's Start on the bottle.

      I guess it's Start and not Start2 but might be wrong....

      Rich.

      Comment


      • #4
        on my bottle it does say start...but i am sure i have start 2
        i think u should contac ur dealer and ask him,that would be the best option..

        mike

        Comment


        • #5
          Start1 is transparent while start2 is brownish in color.

          Comment


          • #6
            It's Start1 Then.....

            Do I need to dose different amount.

            Rich B.

            Comment


            • #7
              all the start2 i have is clear, but i'd ask your dealer

              Comment


              • #8
                The start 2 I have is clear
                Sean

                Tank Specs:60g Cube SPS/Clam tank, ASM G1x Skimmer, DIY ZEOvit Reactor, 1x400w EVC 14k, Marine Life Aquatics CR-250 CaRx (RIP)

                Not sure yet.....Build Thread to come!

                Comment


                • #9
                  Rich, does your bottle have a large light yellow "2" after the Start? Bob
                  "There might be something to this ZEOvit"

                  Comment

                  Working...
                  X