Announcement

Collapse
No announcement yet.

How much zeo carbon?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • How much zeo carbon?

    I have been running 200ml, changed every 30 days, on my 75g (net volume), and it seems to be working okay. I noticed today that the bag and guide say 1000 ml for every 250g, which would be 300 ml. Should I increase the amount?

    Tom
    Current Tank: 75g sps restarted with ZEOvit August 2004, Aqua Connect 14K 250W SE MH x 2, SLS HQI ballasts, 54W blueplus T5s x 2, H&S A150 external (recirculating) skimmer, Tunze Stream 6060, 6000 with single controller, Geo Ca reactor, in-sump ZEOvit reactor from Madison, Aquacontroller

  • #2
    Hi Tom, I use slightly less quantity than the guide recomendation. If you decide to increase, plz. do this over a couple of changes[2mos] just to be safe. Also, be careful about changing carbons, as they are not all equal in their effects. Bob
    "There might be something to this ZEOvit"

    Comment


    • #3
      i do 1 cup per 100 gallons so i dose 2 cups for my net volume of 200 gallons.

      Nick
      275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LR

      Comment


      • #4
        I also use 2 cups for my net vol of 200 gallons. Two little fishes brand. Hydro carbon. Very pleased with this brand.

        Comment


        • #5
          just order the 2 fishes head its the best out there as for PO4
          Nick
          Nick
          180G SPS Mainly
          10 Bulb T5 Starfire
          Calcium Reactor
          3 Tunze 6105's
          Profilux Controller
          ATB Return w/ wavysea
          ATB M External Skimmer


          Comment


          • #6
            I just started using ZEOcarbon and noticed that when I rinse it, the black powder doesnt stop. Does it not need to be rinsed?

            Comment


            • #7
              edward,
              u right,but i rinse only a few times....and put it in the sump...no problem here...
              mike

              Comment


              • #8
                If the carbon is moved while rinsing, the powder will be produced constantly by the mechanical abrasion. I try to “move” the carbon only for the first minute while I rinsing. It is harmless for corals and fish if the powder reaches the system.

                G.Alexander

                Comment


                • #9
                  I rinse and soak mine in RO/DI overnight before I add it.. Might be overkill but I have always soaked things overnight before going into my tank.. I love the zeo carbon.. I use 2 cups for 200 net also...

                  Comment


                  • #10
                    Edward- i have the same problem, i soak mine over night like Jeff and then rinse it well trying not to rub it together and throw it in the sump. it has worked so far.

                    Nick
                    275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LR

                    Comment

                    Working...
                    X
                    😀
                    🥰
                    🤢
                    😎
                    😡
                    👍
                    👎