Tweet
Well, since I didn't read/hear of any progress on this front I went ahead and DIY'd an ozone connection. I got a 1/2" barb "T", spliced out a small piece of the airline and placed the "T" in there. I took the little piece put in on the horizontal limb, jammed a 1/2"mptx1/4" barb on that and voila! Ozone connected.....no apparent effect on air intake, but neither do I have a gauge on it to measure...plenty of putrid ozone tainted skimmate though.
-
10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKS -
if you want a guage, i can let you borrow mine -
Frankly Madison, I really don't worry about things like that. The thing works. It was very easy to tune. I can make whatever skimmate I want. Airflow, shmareflow.10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
Did you replace the BK silicon airline? According to Klaus it's not ozone safe and the T should be connected directly to the pump air intake if don't replace the standard silicon hose.400 gallon reef, Bubble King 300, I~Spin, 2 x 10,000K BLV 400W, 2 x 20,000K Radium 400W, 2 x 6,400K Osram 400W, Schuran Jetstream 1, AquaController ProComment
-
I'll replace the tubing as needed....10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
Thank for the idea moonpod, I will try this when I get my 400 EXT up and running..._____________________
ShawnComment
-
moonpod, do you know what size that silicon airline is ??Originally posted by moonpod_____________________
ShawnComment
-
One more question, With your ozone T'd in, are you running any kind of air pump or just letting the BK suck in the ozone ??_____________________
ShawnComment
Comment