Announcement

Collapse
No announcement yet.

Skimmer ??????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Skimmer ??????

    My ASM G6 for some reason at night is overflowing then in the morning goes back to normal does anyone have any ideas why this is happening ?
    Nick
    Nick
    180G SPS Mainly
    10 Bulb T5 Starfire
    Calcium Reactor
    3 Tunze 6105's
    Profilux Controller
    ATB Return w/ wavysea
    ATB M External Skimmer



  • #2
    Nick,

    At night do you have any pumps that shut down, which change the flow rate or the height of the water in your sump?

    Dave B
    400g SPS Reef - 33g Surge - +30k gph Flow - Lots of DIY / 1100g Outdoor SPS System / 280g FO Watch my Reef Tank, LIVE!!!

    Comment


    • #3
      I have 4 tunze 6100's on the multi controller but they lower not shut down Wouldnt that lower the sump instead of raise it ?
      Nick
      180G SPS Mainly
      10 Bulb T5 Starfire
      Calcium Reactor
      3 Tunze 6105's
      Profilux Controller
      ATB Return w/ wavysea
      ATB M External Skimmer


      Comment


      • #4
        Well the Tunzes shouldn't affect the sump at all.

        Do you have a topoff system on a timer, that is running at night and over filling the sump ?

        Dave B
        400g SPS Reef - 33g Surge - +30k gph Flow - Lots of DIY / 1100g Outdoor SPS System / 280g FO Watch my Reef Tank, LIVE!!!

        Comment


        • #5
          no i have a auto top off that is on a float switch i lowered it to see if that helps any suggestions ??
          Nick
          180G SPS Mainly
          10 Bulb T5 Starfire
          Calcium Reactor
          3 Tunze 6105's
          Profilux Controller
          ATB Return w/ wavysea
          ATB M External Skimmer


          Comment


          • #6
            well I not very sure but my guess is somehow the swing in PH will affect the performance of the skimmer cause I also observe similiar thing
            ---------------------------
            180g 3 side Low Iron Glass, Lighting: ATI Power Module 10 x 80W KZ Coral Light (awiting for to mix with fiji purple), Return Pump: Red Dragon 12m3, Tunze WaveMaker:1x 6200, 3 x 6100 and 1 x 6060 + Multicontroller 7095, Bubble King 300 Internal, Deltec - PF 601S, Arctica Chiller 1/2HP, I~Zeo Reactor IZ-618

            BK 300 in actionhttp://smg.photobucket.com/albums/v5...IDEO_00003.flv

            Comment


            • #7
              PH at night ios 7.9 and day 8.1
              Nick
              180G SPS Mainly
              10 Bulb T5 Starfire
              Calcium Reactor
              3 Tunze 6105's
              Profilux Controller
              ATB Return w/ wavysea
              ATB M External Skimmer


              Comment


              • #8
                Ok this is still happening I dont know what the hell it is making the skimmer to do this. It is like a alarm clock for me now 630 7 am I here the clanking noise of the skimmer cap bouncing up and down
                Nick
                180G SPS Mainly
                10 Bulb T5 Starfire
                Calcium Reactor
                3 Tunze 6105's
                Profilux Controller
                ATB Return w/ wavysea
                ATB M External Skimmer


                Comment


                • #9
                  Are you feeding the tank right before the lights go out? Are you adding anything at night that would make the skimmer work overtime?

                  Comment


                  • #10
                    no nothing at all
                    Nick
                    180G SPS Mainly
                    10 Bulb T5 Starfire
                    Calcium Reactor
                    3 Tunze 6105's
                    Profilux Controller
                    ATB Return w/ wavysea
                    ATB M External Skimmer


                    Comment


                    • #11
                      Waterlevel has never made too much a diff with my old asm untill i added the gate valve mod.
                      Does it happen when Zeolith rx shuts down? If you do have the gatevalve mod i found having the last piece of pvc above the waterline so waterlevel would not put backpressure to the system
                      180 mixed reef, extreme 40gal frag tank, 33 gal sump,30 gal fuge, profilux plus II controller,profilux doser, GEO 618 CA/RX tunze 6100's, BK 250 internal, 2 400watt halides, 4 blue plus t-5's on icecap ballast, I run GFO, and dose vodka,sugar, and vinigar with ammino acids, and use somewhat of the balling method.

                      Comment


                      • #12
                        Ok ill try that then thank you
                        Nick
                        180G SPS Mainly
                        10 Bulb T5 Starfire
                        Calcium Reactor
                        3 Tunze 6105's
                        Profilux Controller
                        ATB Return w/ wavysea
                        ATB M External Skimmer


                        Comment


                        • #13
                          Originally posted by The man
                          Waterlevel has never made too much a diff with my old asm untill i added the gate valve mod.
                          Does it happen when Zeolith rx shuts down? If you do have the gatevalve mod i found having the last piece of pvc above the waterline so waterlevel would not put backpressure to the system
                          Thank you
                          Im glad he listens to you ...............I was telling him that all day yesterday

                          skimmer return above water level ................. THANK YOU ..............
                          www.reeftecdesigns.com

                          Comment


                          • #14
                            you werent explaining ahy thats what I kept asking you no need to be offended if you explained it I would of understood it like he did
                            Nick
                            180G SPS Mainly
                            10 Bulb T5 Starfire
                            Calcium Reactor
                            3 Tunze 6105's
                            Profilux Controller
                            ATB Return w/ wavysea
                            ATB M External Skimmer


                            Comment

                            Working...
                            X