Tweet
There's a mention on the WAMAS MACNA review that IC has a mag coupled pump that they displayed. Anyone see this?
-
10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKS -
Sure did, it was very cool looking.Originally posted by moonpod
on the inside of the tank goes the propeller, and on the outside goes the motor, it was killer.. Sorry no pics, as I was a dumbarse and forgot my card reader so I just said forget it.. Gary may have some though?
It moved a lot of water! -
WOW, No heat as the motor is outside the tank--does anyone have it's vital stats, ie. flow rate, adjustable-flow & finally the cost? Thnx. Bob"There might be something to this ZEOvit"Comment
-
i agree with what Bob said and where can we pick them up at?
Nick275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LRComment
-
WILL THE ASSAULT ON MY BANK ACCOUNT NEVER END????? ;-)
Love them, but definitely limited applications. Can't move em around like a Tunze.Comment
-
I dunno dude. That looked like it's got the magnet mount already built in....
I WANT IT!10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
Chuck's correct--not a problem David as it's magnetized. Bob"There might be something to this ZEOvit"Comment
-
Arggh. Now just need to see the specs. Icecap isn't stupid and I'm sure they made it every bit as controllable as the 7095. I won't be the guinea pig as I have a pair of capable 6200's on my 150 unless Chuck tells me to buy it.
Chuck if you get any details behind the scenes LMK. GPH, flow pattern, warrantee, etc. Tunzes are rock solid with great support but dang they're big in my small 5' tank.
Comment
-
Dave, I don't care what the specs are, I GOTS to play with one of these....10x3x2 FOWLR (for now)
BK400ext
RD12 return, 2 RD12 closed loop, wavebox with extension
MRC kalkmixer
IKSComment
-
Interesting!! Chuck, I'll wait for your review.
You are always the first. 
Comment
-
hahaha.. you are correct Chuck and others, you are only limited to the amount of glass you have! You can put these babies all over the place.
Just sent Chris an email to get info and MSRP on them. I will post as soon as he gets back to me.
scottComment
-
I think I read that they were going to be around the $350 range.Comment
-
Originally posted by OUinLA
WOW.. To be honest it looked like it may have cost them about $40.00 to make, it didnt look like Tunze Quality. I hope that is not correct, they didnt move near the amount of water that a 6060 moves and those are $99.00. Of course you would need a magnet.. but my goodness..Comment
-
I was told that there try to release around Jan, and controllers in late summer next year. They were taking Applications for Beta Testers, so It will be while before they are out.
Two major drawbacks that I see is that being the way there are driven, you can not stick them in the back corner and angle them out to the front. You only option is to the middle of the side of the take and run side top side. If you do that the cord is harder to hide on the outside. They will hopefully work that out by production time.
Scott is right, not near the quality of Tunze, but that may change also.BrianComment
Comment