Announcement

Collapse
No announcement yet.

A better magnet?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A better magnet?

    I currently use a hammerhead magnet on my 1/2" glass tank. For those of us with cabinetry and built in tanks, It would be very handy if someone came out with a magnet that was oversized on the inside to clean above/below the cabinetry on the inside of the tank. When I run the magnet along the bottom of my tank, there is about 1/2" of diatom/algae left visible above the sand and even with the cabinetry. Anyone seen one of these? Is it possible to buy the next size bigger magnet and use just the inside piece?

    TIA
    Marshal
    265 gallon SPS tank. Bubble King 300 Internal, MRC CR-6 Calc Reactor. 3 400 watt 20k Helios. 90 gallon Frag tank plumbed into main display.

  • #2
    Marshal,

    Here you go:

    http://www.magnavore.com/magnets.html

    Everything you can ever ask for in a magnet includin oversized inner magnet!
    Farish

    Setup: 250G System, ATI Powermodul 10x80w T5s, 4x6100 Tunze Streams & 7095 MultiController, Deltec PF1000 CR, Deltec AP902 Skimmer, IKS, Zeovit, Artica 1Hp Chiller

    Comment


    • #3
      Perfect, just what I was looking for. Thanks Farish.
      265 gallon SPS tank. Bubble King 300 Internal, MRC CR-6 Calc Reactor. 3 400 watt 20k Helios. 90 gallon Frag tank plumbed into main display.

      Comment


      • #4
        Easyblade

        Hallo Marshal,
        i use a normal magnet with a Easyblade glued on the top of the inner magnet.
        It is fantastic, now it is possible to clean the glass near the sand without scratching the glass.
        It was very handy to clean the sites covert by the cabinetry.
        Have a look at Easy Blade.

        greets
        Salty

        Comment

        Working...
        X