Tweet
Well i hooked mine up today and luv it. I have it set at 77F and now my heaters and chiller are off untill needed I love that idea since my electric bill is insane
-
Nick
180G SPS Mainly
10 Bulb T5 Starfire
Calcium Reactor
3 Tunze 6105's
Profilux Controller
ATB Return w/ wavysea
ATB M External Skimmer
-
I have the same unit. I love it. have mine set at 78 right now.
one thing to keep in mind is to recalibrate it often. i do it every 3-4 months. most of the time its off alittle. once it was off by .7 degrees.
very nice unit though.
Nick275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LR -
when you calibrate it you mean holding in the 2 buttons together ?Nick
180G SPS Mainly
10 Bulb T5 Starfire
Calcium Reactor
3 Tunze 6105's
Profilux Controller
ATB Return w/ wavysea
ATB M External Skimmer
Comment
-
Look in the manual and it will tell you the exact directions.
I calibrate it using JBNY's method. do a search for "ice" on this site and you will find the thread. you basically submerege the probe in the ice cold water and calibrate it to 32 degrees.
anyway Joe describes it better.
Nick275 Gallon Envision Acrylics Tank, 70 gallon sump, BK 300 internal, Zeovit, 5 sequence darts (1 on a oceansmotions 4-way), medusa dual controller, 2 ebo jaer 250w heaters, 1/2 hp JBJ comercial chiller, 4 RO IIIs w/14k hamilitons, 4 VHOs super actinic, deltec pf500 Ca Rx, 3 reef ceramic pillar, and 1 reef ceramic mini-reef, 5 ceramic closed loop intake screen covers, with 50ish pounds of LRComment
Comment