Tweet
I cant figure out this controller its driving me NUTZ PLEASE help me out here
Nick
Nick
-
Nick
180G SPS Mainly
10 Bulb T5 Starfire
Calcium Reactor
3 Tunze 6105's
Profilux Controller
ATB Return w/ wavysea
ATB M External Skimmer
-
RTFM :P -
whats that mean ?????
NickNick
180G SPS Mainly
10 Bulb T5 Starfire
Calcium Reactor
3 Tunze 6105's
Profilux Controller
ATB Return w/ wavysea
ATB M External Skimmer
Comment
-
Something about the manual
400 gallon reef, Bubble King 300, I~Spin, 2 x 10,000K BLV 400W, 2 x 20,000K Radium 400W, 2 x 6,400K Osram 400W, Schuran Jetstream 1, AquaController ProComment
-
RTFM = read the f***** manuealOriginally posted by losmandyComment
-
O thanx like i didnt try that already i cant seem to get it to put the CO2 on when its at 6.8
NickNick
180G SPS Mainly
10 Bulb T5 Starfire
Calcium Reactor
3 Tunze 6105's
Profilux Controller
ATB Return w/ wavysea
ATB M External Skimmer
Comment
-
sorry nick, i dont have one or i would be more then happy to give you some tips,Comment
-
You set the high and the low point and in between those levels is your set point. I believe it's sensitivity is one tenth. If you want 6.8 set the high to 6.85 and the low to 6.75. It should turn co2 on at 6.85 then lower it to 6.75 then turn off until it hits 6.85 again, then it will cycle like that. I believe that's the range and as accurate as it can get.Comment
Comment